Wednesday, February 24, 2016

Phone 5 Press Conference live

Aesthetic change phone 5/phone 4S started

After 1.5 years, the phone 5 finally released, new machines using the new design elements, supporting positive fingerprint identification, equipped with Xiao long 820 and a 16 million-pixel camera with 4 axis image stabilization. Also released were phone 4S, although 1080P is also a 5-inch screen He Xiaolong 808, but joined the fingerprint identification and upgrade two-sided glass and metal frame.

Before detailed use and evaluation, we look at the real start:

Phone 5

Aesthetic change phone 5/phone 4S started

Millet 5 cancellation of the previous generation 2.5D glass, a positive screen for a block of flat glass, metal frame just above the screen.

Aesthetic change phone 5/phone 4S started

Home key with fingerprint recognition is long and narrow, flanked by key with a backlight. Home key volume ratio seemed a bit strange, in addition, a smaller area may affect fingerprint recognition speed and compatibility, but also have to wait for the actual tests to confirm.

Aesthetic change phone 5/phone 4S started

Back is still familiar with 3D glasses, but the metal frame without the previous chamfers design, increases overall matte and curved surfaces, handshake has been significantly improved.

Aesthetic change phone 5/phone 4S started

In addition, details are worthy of note, the black version of the logo on the back of very low-key, almost do not see in the picture.

Aesthetic change phone 5/phone 4S started

Millet claiming to use ultra thin border, but on the white version used a similar "ID no border" black, caused large black illusion of Happy Valley, but the dark side of the screen from top to bottom is indeed Happy Valley levels.

Aesthetic change phone 5/phone 4S started

Border dark boundary close-up

Aesthetic change phone 5/phone 4S started

Top is the 3.5mm interface and IR controller and noise-reducing microphone.

Aesthetic change phone 5/phone 4S started

Millet 5 USB Type-C interface that is symmetrically placed on either side of the speaker and microphone.

Aesthetic change phone 5/phone 4S started

Packaging, phone 5 with high version also uses a similar white and red rice series carton packaging.

Accessories include charger, power cord and check card PIN. Marcelo Burlon iPhone 6 Plus

Millet 5 supports high throughput QC3.0 the fast charge, charger 5V 2.5A, 9V, 12V, 2 a 1.5A output.

Phone 4S

Comparison of millet 5, even Lavender is a female-oriented user millet 4s, which are more likely to accept. Positive design elements are familiar with the taste of millet, lavender front panel also has Flash cuttings, appear quite a light show. On the default themes there are red m 3 "stocking grid."

Is a block of glass of the screen on the back, bit of taste of iPhone 4s, and the logo has a fingerprint recognition module symmetrical position.

With a curved metal frame has bright side chamfer, and is a light purple/pink, has a SIM card slot on the left side of the fuselage.

Keys set on the right side, above the antenna on the partition (where there isn't a line that corresponds to the left). Marcelo Burlon iPhone 6 Plus

Another antenna at the top of the partition one and headphone connector, to the right is an infrared remote control, noise-reducing microphone is on the other side.

Is still the symmetrical placement of speakers and a microphone at the bottom, the machine with USB Type-C interface.

Detailed use and evaluation will be completed in the near future, so stay tuned.

Marcelo Burlon iPhone 6 Plus

15 votes

Millet 4S

Millet millet 4S as its first double glass design-phone, with fingerprint recognition, Netcom 2.0, Xiao long 808, 64GB ROM a series of configuration, relative to the millet 4C increased in almost every aspect.

View details of the voting >>

No comments:

Post a Comment